TRSB series of lightning rod is used to protect buildings, tall trees, etc to avoid lightning device. Installed a lightning
conduction at the top of the protected objects, conform to the specifications of wires connected to the network of the
buried effusion. Lightning rod specifications must conform to GB standard, each lightning prodection category has different
high speatication lightning rod.
Structure and Principle
In advance to prevent lightning rod of exciter and reflector and the collecting rod is insulated. The tip of the exciter
and reflector with special structure, energizer absorb and store energy from the nature of the electric field. Reflector with
lightning rod to connect well with the earth and the same potential. Typically, energizer has certain electromagnetic field
intensity with reflector. Flash before the thunder and lightning, lightning rod under the effect of electrostatic induction,the
lightning rod on the heterogeneous charge increased rapidly,the electric field strength rapidly boost exciter voltage between
reflector and increase rapidly, cutting-edge spark breakdown the surrounding air.
Ionizing air makes put lightning rod in the central collection of rod and discharge excitation device in a very short time.
Preliminary put lightning rod ahead of schedule, because of its special structure, the existence of a large number of air ions
to produce a faster than normal lightning rod upward discharge channel,the lightning unlike charge neutralization in advance,
spilled on the earth, and the better protection for buildings.
TRSB series in discharge lightning rod is beautiful, long life characteristics. Lightning protection quality won't change,
after fully active lead thunder system when lightning will activate themselves.The electronic design of lightning rod no need
maintenance, but safe and reliable.